Board 8 > Need help buying a wireless ethernet adapter for a printer.

Topic List
Page List: 1
LapisLazuli
04/23/18 2:45:30 PM
#1:


We've got a printer at work that is hard wired to the wall ethernet port. Hoping to find a way to get a wireless ethernet signal to it, even just 1 to 1, so that we can move the printer to another room that has no ethernet ports. It has a usb slot but it won't recognize wireless adapters, so I need something that will actually plug into the ethernet port.
---
... Copied to Clipboard!
LapisLazuli
04/23/18 4:25:08 PM
#2:


... Copied to Clipboard!
NFUN
04/23/18 4:25:58 PM
#3:


Not worth it the printer will refuse to work for 2 hours then it'll probably explode or something fuck printers just copy everything by hand it's easier
---
Thus is our treaty written, thus is our agreement made. Thought is the arrow of time; memory never fades. What was asked is given; the price is paid.
ARF
... Copied to Clipboard!
Zachnorn
04/23/18 4:43:40 PM
#4:


As an IT support technician, I must say...

NFUN posted...
Not worth it the printer will refuse to work for 2 hours then it'll probably explode or something fuck printers just copy everything by hand it's easier

---
<D
... Copied to Clipboard!
LapisLazuli
04/23/18 4:44:45 PM
#5:


... Copied to Clipboard!
Zachnorn
04/23/18 4:53:27 PM
#6:


But seriously, though, see if that model has a wireless adapter available for it. Sometimes printers have accessories you can buy for them. Keep in mind, if your wireless uses WPA/WPA2 Enterprise, it may not work. I can almost guarantee it won't work, I've yet to see a printer that supports WPA/WPA2 Enterprise.

That said, another option is to get a powerline Ethernet adapter. I have never used one, but it is supposed to use the building's electrical wiring as a network and allow data to be sent. Generally, you need it to be connected directly into a wall. Also, I believe it needs to be on the same main breaker to communicate (or something - I'm not an electrician and I know there's something that connects the circuits to the main power line that goes to a building, needs to all be on the same one). I have no idea how well this will work in a corporate environment.

Other option: There are devices that allow you to wirelessly connect ethernet plugs, I'm sure. You might be able to set up a router to act in bridge mode (but please set it up to not actually route or issue IP addresses or anything before connecting it to the network unless you want to screw up the network) . An old computer with a WiFi and Ethernet card could also be used for that.
---
<D
... Copied to Clipboard!
LapisLazuli
04/23/18 5:51:37 PM
#7:


... Copied to Clipboard!
Topic List
Page List: 1