LogFAQs > #925055320

LurkerFAQs, Active DB, DB1, DB2, DB3, DB4, Database 5 ( 01.01.2019-12.31.2019 ), DB6, DB7, DB8, DB9, DB10, DB11, DB12, Clear
Topic List
Page List: 1
TopicAny network/IT experts in here. I'm thoroughly confused.
Hanky_Bannister
07/22/19 11:33:35 PM
#13:


CableZL posted...
Hanky_Bannister posted...
CableZL posted...
Is the uplink port of your router at 1000/full duplex?

It's possible that you have a cat5 cable somewhere in the mix, too

how do i check the full duplex?

oh and it could be the cables. do you know what spec i have to have to get the 200mbps speed?


It should be somewhere in the router's firmware, possibly on a status page. There's also the possibility that the LEDs on the port are set so that it lights up in a way that indicates 10, 100, or 1000.

Cat5e or cat6 would get you the 1000/full duplex LAN speeds

i see slaac but nothing about full duplex

i think theres a device manager setting for the modem that talks about that
---
"3rd Best Whiskey in Northern Burma"
https://www.youtube.com/watch?v=hvjOu4EzjYg
... Copied to Clipboard!
Topic List
Page List: 1