LogFAQs > #952599674

Making an omelette is simple!

1. Make a square of thin wood (the thinest piece of wood will be used as the outer piece of wood).
2. Cut the inner piece of wood in half. This will give you a piece of 1mm thick wood to finish the inside piece of wood. Do this until you have a piece of 1mm thick wood in each half of your omelette.
3. Cut the inner pieces of wood out of this piece of 1mm thick wood.
4. Make a square of thin wood.
5. Measure out 1mm of thickness from both ends of the 2nd hole.
6. Cut the inner hole out. You will now have a square of 2mm thick wood. This will be used as the outer piece of wood and you will be able to hold up the omelette like a glove. Use the 1mm thick wood as a guide to help in how to position the Omel. The 1mm thickness will not cover all the gap between the two ends of the square. It should not be too big as a safety measure. The 1mm should be wide enough for one person to hold the omel properly.
7. Make a square of thin wood. Repeat this step 4 until you have a square of 2mm thickness in each half of your omelette.
8. Cut the inner hole out. You will now have a square of 2mm thickness in each half of your omelette.
9. Measure out 2mm thickness from both ends of the middle hole.
10. Cut out the middle hole.
11. Make a square of thin wood.
12. Measure out 1mm thickness from both ends of the middle hole.
13. Cut the middle hole out. You will now have a square of 2mm thickness in each half of your omelette.
14. Cut out the middle hole.
15. Make a square of thick wood.
16. Measure out 2mm thickness from both ends of the middle hole.
17. Cut out the middle hole. You will now have a square of 1mm thickness in each half of your omelette.
18. Cut out the middle hole.
19. Make a square of thick wood.
20. Measure out 2mm thickness from both ends of the middle hole.
21. Cut the middle hole out. You will now have a square of 1mm thickness in each half of

---

All Hail the Ticket Oak.
All Hail the Ticket Oak.